QRPworks SideKar Decoder Edition User Manual Download Page 78

Page: 78 / 88

SideKar

Decoder Edition

User Manual

rev 1.0

Page 78 of 88

Updating the Firmware

The SideKar

Decoder Edition

firmware is able to be upgraded

via

the “PC” Micro USB port. Please contact us via the

www.QRPworks.com Contact page if an update is needed.

Technology

The SideKar

Decoder Edition

is not just a larger screen. Inside

is a PIC microcontroller. It is a computer on a chip, complete
with CPU, memory, and EEPROM. Firmware running on the
microcontroller controls the presentation and all functions of the
SideKar

Decoder Edition

There’s a lot of stuff going on!

Support

If for any reason you have questions or issues regarding the
SideKar

Decoder Edition

, please contact us via the

www.QRPworks.com Contact page.

Acknowledgements

We would like to acknowledge and thank Sierra Radio Systems
for the use and support of their Hamstack C library.

Summary of Contents for SideKar Decoder Edition

























































































Search results

Summary of Contents for SideKar Decoder Edition

Reviews:

Related manuals for SideKar Decoder Edition

Brands by name

Popular brands

QRPworks SideKar Decoder Edition, User Manual

Search results

Summary of Contents for SideKar Decoder Edition

Reviews:

Related manuals for SideKar Decoder Edition

Brands by name

Popular brands