SideKar
Decoder Edition
User Manual
rev 1.0
Page 74 of 88
System Reset
If you want to reset the SideKar
Decoder Edition
, press
Alt-R
.
Then press
“
Y
” to confirm the reset or “
N
” or
ESC
to cancel the
reset. The reset is similar to turning the unit off and then on
again.
One reason for doing a reset is to re-initiate the
communications to the rig, in case it is not connected.
Help
For help in remembering SideKar
Decoder Edition
commands,
press
F11
or
ALT-H
. A summary of the features and
commands will be shown. Press
Page Up
or
Page Down
to
scroll through the list.
Note: the Up and Down arrow keys can be used for the Page
Up and Page Down functions here, respectively. This is to
accommodate small keyboards without Page Up / Down keys.
can be found at the end of this
manual. But since help is built in, you may not need to take
any paper with you.
Page Down or Up to see the next or previous page(s)
