Page 1 of 7
iambic_paddle_w-base_assy_021816.pdf
QRPGuys Iambic Mini Paddle w/Base
First, familiarize yourself with the parts and check for all the components. If a part is missing, please
contact us and we will send one. You must use
to request a part.
Parts List
1
– QRPGuys Iambic Paddle w/Base PCB, 5 pieces
1
– 3.5mm stereo audio jack
2
– 3 position in-line header
2
– header jumper (Berg connector)
1
– 3.5mm stereo plug
2
– SS paddle leaf
1
– 4-40 x 3/8”L SS pan head Phillips screw
1 - #4 SS flat washer
1 - #4 SS lock washer
1 -
#4 x .187”L nylon spacer
1
– 4-40 brass nut
4
– 2-56 x .375”L SS pan head Phillips screw
4
– 2-56 SS nut
4 - #2 SS flat washer
4 - #2 SS lock washer
4 -
#2 x .187”L nylon spacer
1 - #2 x 3/4
”L nylon spacer
1
– 2-56 x 1”L SS pan head Phillips screw
2 -
1/2” x 1” vinyl caplug
2 -
1/2” wide x 2”L plastic shim
1
– 4” x 1/8” black cable tie
4
– Silicone self-adhesive foot, 6mm
Even if you have done radio kit assembly before, please read through all the instructions before you
start. This kit is a little different, in that the mechanical components are the part of the printed circuit
board. The instructions give you the scope of the project and an understanding of the techniques we
have employed. You will be assembling the kit using five pieces of PCB material, and when assembled,
form the electrical connections. There are solder pads, registration marks, and letter coded parts, that
match each other. When you tack and solder the components it will make a sturdy mechanical and
electrical assembly.
