QPIX MDFC-1400 Quick Start Manual Download Page 1

Caution 

MDFC1400 

Read This Guide 

Before Using  

1. Choose appropriate type of Negative Film Holder/Adapter to 
match your film size and place film into the holder/adapter. Insert a 
SD memory card into the card slot (Optional). 

2. Connect power to your MDFC1400 scanner via UBS cable and 
power AC adapter. Press Power button to turn on power. 

3. Press "Left/Mirror" or "Right/Flip" until "

Language

" appears on 

the screen. Press "OK/Entre" to enter language submenu, press 
"Left/Mirror" or "Right/Flip" to choose your preferred language. 
Press "OK/Entre" to confirm your choice. 

4. Press "Left/Mirror" or "Right/Flip" until "

Film

" appears on the 

screen. Press "OK/Entre" to enter film type selection submenu, 
press "Left/Mirror" or "Right/Flip" to choose your film type to be 
scanned. Press "OK/Entre" to confirm. 

5. Press "Left/Mirror" or "Right/Flip" until "Resolution" appears on 
the screen. Choose your preferred image resolution. Note that 
Super 8 film type's supported resolution is 6M, and 126KPK film 
type scanning resolution is 16M.  Press "OK/Entre" to confirm. 

6. In the main menu, select "

Capture

" or press "OK/Enter" button. 

Feed loaded film holder/adapter into the holder slot of the 
scanner, if necessary, slightly move the holder to adjust its 
position so that the film appears in the centre of the scanner 
screen. 

Reviews: