QP-Audio QPM Series, User Manual

Page: 3 / 20

Caution
To reduce the risk of electric shock, do not remove
the top cover or the rear section. No user serviceable
parts inside. Refer servicing to qualifi ed personnel.
Do not expose this appliance to rain and moisture.
The apparatus shall not be exposed to dripping or
splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the manual.
This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside
the enclosure voltage that may be sufficient to
constitute a risk of shock.
Keep these instructions
Follow all instructions
Do not use this apparatus near water
Clean only with dry cloth
Do not block any ventilation openings. Install in
accordance with the manufacture´s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus(including
amplifiers) that produce heat.
The apparatus shall be connected to a mains
socket outlet with a protective earthing connection.
Only use attachments/accessories specified by the
manufacturer
Unplug this apparatus during lightning storms or
when unused for long periods of time
Initial operation
Be sure that there is enough space around the unit for
cooling purposes and to avoid over-heating please
do not place your mixing console on high temperature
devices such as radiators or power amps.
The console is connected to the mains via the supplied cable.
The console meets the required safety standards. Blown fuses
must only be replaced by fuses of the same type and rating.
Please note that all units must be properly grounded. For
your own safety, you should never remove any ground
connectors from electrical devices or power cables, or render
the inoperative.
Please ensure that only qualified people install and operate
the mixing console. During installation and operation,
the user must have sufficient electrical contact to earth,
otherwise electrostatic discharges might affect the operation
of the unit.
Important safety instructions
1
EN