Qorivva MPC5xxx/SPC5xx Debugger and NEXUS Trace
123
©1989-2021 Lauterbach GmbH
Command Reference: TrOnchip
TrOnchip.CONVert
Adjust range breakpoint in on-chip resource
There are 2 data address breakpoints. These breakpoints can be used to mark two single data addresses or
one data address range.
Format:
TrOnchip.CONVert
[
ON
|
OFF
]
ON
(default)
After a data address breakpoint is set to an address range all on-chip
breakpoints are spent. As soon as a new data address breakpoint is set
the data address breakpoint to the address range is converted to a single
data address breakpoint. Please be aware, that the breakpoint is still
listed as a range breakpoint in the
command to verify the set data address breakpoints.
OFF
An error message is displayed when the user wants to set a new data
address breakpoint after all on-chip breakpoints are spent by a data address
breakpoint to an address range.
TrOnchip.CONVert ON
Break.Set +0x1f
Break.Set +0x3f
Data.View 0x6020
Data.View 0x7400
