14
PROJECTOR INPUTS SELECTION
When the projector is connected to several input sources, use the “Pin”
button to switch between projector signal inputs. (Using the remote control,
press the “PROJECTOR INPUT” button)
IMAGE ROTATION
In order to rotate the image, press the “Rot” button once, the displayed
image will be rotated ±180 degrees clockwise. Continue to press the
“Rot” button to restore the image to its initial position.
IMAGE REVERSION
To display a vertically mirrored image, press the “MIRROR” button. Press
the “MIRROR” button again to exit.
INFRARED REMOTE CONTROL
The visualizer’s remote control can control the camera from different
angels. On the left side of the visualizer stage, there is a built-in remote
control storage compartment where you can store the remote control when
it is not in use.
Please note that an infrared remote control can only be used up to a
certain distance to the unit. Objects situated between the visualizer and the
infrared remote control and a weak battery may interfere with the reception.
PRESET FUNCTION
Use the “SET” button to preset 8 steps of the Zoom/Focus position, when
the button is pressed, it moves step by step. (Using the remote control
press the “RUN” button to the run preset.)
3 X 3 MULTIPLE SCREEN DISPLAY
Press “Mem” button to retrieve images captured and stored in the
visualizer’s memory. The stored images can be displayed in a 3 x 3 matrix.
Press the numeric buttons to display their corresponding images. Under
