4
Note: The horizontal and vertical distance of mounting holes on the back of screen must be within
the required distance of bracket.
OPS Installation
Note: The OPS does not support hot-plugging. Please insert the plug of the OPS after the interactive
panel is disconnected from the power.
Install the OPS by the following steps:
1.
Insert the OPS into the special slot on the rear of the interactive panel.
2.
Tighten the screws.
3.
Confirm that the OPS is installed correctly.
Attach the mounting arms to the
back of screen with the screws.
Insert wall plugs into the mounting holes.
Push the self-tapping screws through the
bracket into the wall plugs and tighten the
screws.
All manuals and user guides at all-guides.com
all-guides.com
