LED
Status
Description
Drive
Flashes red
The data is being accessed and a read/write error occurs
during the process.
Red
A drive read/write error occurred.
Flashes green
Data is being accessed.
Green
The drive is ready.
Off
No drive was detected.
2.5 Gigabit
Ethernet speed
Green
The network connection is operating at 2.5 Gbps.
Orange
The network connection is operating at 1 Gbps.
Off
• The network connection is operating at 100 Mbps.
• There is no network connection.
2.5 Gigabit
Ethernet activity
Orange
A network connection has been established.
Flashes orange
The device is being accessed from the network.
Off
There is no network connection.
M.2 SSD
Flashes red
The drive is being located.
Red
A drive read/write error has occurred.
Flashes green
The data is being accessed.
Green
The drive can be accessed.
Off
No drive is detected.
Audio Alert
Duration
Frequency
Description
Short beep (0.5 seconds)
1
• The NAS is starting up.
• When the reset button is
pressed for 3 seconds, the
NAS resets configurations.
• When the reset button is
pressed for 10 seconds, the
NAS resets configurations and
reboots.
• The operating system was
updated.
• The device is starting USB
One-Touch Copy.
2
The USB device has been
removed (USB One Touch copy
button).
3
Cannot detect installed disk.
TVS-hx88X User Guide
Basic Operations
70