Configuring TCIP/IP Settings
You can configure the following settings for each network adapter on the device:
• IP address
• Subnet mask
• Default gateway
• Primary DNS
• Secondary DNS
1.
Press
Enter
or
Select
.
The panel displays the NAS name and QuTS hero version.
2.
Press and hold
Enter
for two seconds.
The panel displays
Main Menu 1.TCP/IP
.
3.
Press and hold
Enter
.
The panel displays the IP address of the first network adapter.
4.
Press
Select
repeatedly until the panel displays
Enter Network Settings
.
5.
Press and hold
Enter
.
The panel displays the configurable network settings.
6.
Press
Select
and
Enter
to configure the settings.
For details, see
.
Viewing Drive Information
The LCD panel can display the temperature and capacity of each drive installed in the NAS.
1.
Press
Enter
or
Select
.
The panel displays the NAS name and QuTS hero version.
2.
Press and hold
Enter
for two seconds.
The panel displays
Main Menu 1. TCP/IP
.
3.
Press
Enter
repeatedly until the panel displays
Main Menu 2. Physical disk
.
4.
Press and hold
Enter
.
The panel displays the temperature and capacity of the drive in bay 1.
5.
Press and hold
Select
.
Repeat this step as necessary.
The panel displays the temperature and capacity of the next drive.
Viewing Volume Information
The LCD panel can display the name and capacity of each volume.
1.
Press
Enter
or
Select
.
The panel displays the NAS name and QuTS hero version.
2.
Press and hold
Enter
for two seconds.
The panel displays
Main Menu 1. TCP/IP
.
TVS-hx88X User Guide
Basic Operations
65