LED
Status
Description
Drive
Flashes red
The data is being accessed and a read/write error occurs
during the process.
Red
A drive read/write error occurred.
Flashes green
Data is being accessed.
Green
The drive is ready.
Off
No drive was detected.
2.5 Gigabit
Ethernet speed
Green
The network connection is operating at 2.5 Gbps.
Orange
The network connection is operating at 1 Gbps or 100
Mbps.
Off
• The network connection is operating at 100 Mbps.
• There is no network connection.
2.5 Gigabit
Ethernet activity
Orange
A network connection has been established.
Flashes orange
The device is being accessed from the network.
Off
There is no network connection.
USB
Blue
A USB device connected to the USB One Touch Copy port
is detected.
Off
No USB expansion unit has been detected.
USB One Touch
Copy
Flashes blue every 0.5
seconds
• A USB device connected to the USB One Touch Copy
port is detected.
• A USB device connected to the front USB port is being
removed from the device.
• A USB device connected to the front USB port is being
accessed.
Blue
A USB device is detected in the front USB port.
Off
No USB device is detected.
Audio Alert
Duration
Frequency
Description
Short beep (0.5 seconds) 1
• The NAS is starting up.
• When the reset button is pressed for 3 seconds,
the NAS resets configurations.
• When the reset button is pressed for 10
seconds, the NAS resets configurations and
reboots.
• The operating system was updated.
• The device is starting USB One-Touch Copy.
3
• Cannot detect installed disk.
TS-x73A User Guide
Basic Operations
52
