QNAP TS-435XeU User Manual Download Page 36

Page: 36 / 58

LEDs

LEDs indicate the system status and related information when the device is powered on. The following

LED information applies only when the drive is correctly installed and when the device is connected to the

network or to a host.

For details on the location of the LEDs, see

Components

LED

Status

Description

System Status

Flashes green and red alternately every

0.5 seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being

updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in

progress.

• Online RAID Level Migration is in

progress.

Red

• The drive is invalid.

• The disk volume has reached its full

capacity.

• The disk volume is about to reach its

full capacity.

• The system fan is not functioning.

• An error occurred when accessing

(read/write) the data.

• A bad sector is detected on the hard

drive.

• The device is in degraded read-only

mode (two member drives failed in

RAID 5 or RAID 6 but the data can still

be read).

Flashes red every 0.5 seconds

The device is in degraded mode (one

member drive failed in RAID 1, RAID 5, or

RAID 6).

Flashes red once

The device has received a command from

the remote control.

Green

The device is ready.

Flashes green every 0.5 seconds

• The device is not configured.

• A drive is not formatted.

Off

• All drives are in standby mode.

• The device is powered off.

TS-435XeU User Guide

Basic Operations

Summary of Contents for TS-435XeU



























































Search results

Summary of Contents for TS-435XeU

Reviews:

Related manuals for TS-435XeU

Brands by name

Popular brands

QNAP TS-435XeU, User Manual

Search results

Summary of Contents for TS-435XeU

Reviews:

Related manuals for TS-435XeU

Brands by name

Popular brands