manualshive.com logo in svg

QNAP TS 32PXU Series, User Manual

Share
Download
QNAP TS 32PXU Series User Manual Download Page 20

b.

Push the handle. 

5.

Power on the NAS.

Installing Expansion Cards

Installing Expansion Cards on the TS-432PXU or the TS-432PXU-RP

Warning

• Only qualified personnel should perform the following steps. Failure to follow

instructions can result in serious injury or death.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades:

 Keep your hands and other body parts away from moving fan

blades.

•

Other moving components:

 Keep your hands and other body parts away from other

moving components.

Note

This process applies only to the TS-432PXU and the TS-432PXU-RP.
For details on the TS-832PXU, TS-832PXU-RP, and TS-1232PXU-RP, see 

Installing

Expansion Cards on the TS-832PXU, TS-832PXU-RP or the TS-1232PXU-RP

.

1.

Check the expansion cards and brackets supported by your model on the QNAP website.

a.

Go to 

www.qnap.com/compatibility

.

TS-x32PXU User Guide

Installation and Configuration   

19

Summary of Contents for TS 32PXU Series


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands