86
Stop
Stop the running job.
Edit
Edit the job settings.
View
View the job status and logs.
Re s toring iSC SI LUNs
To restore an iSCSI LUN to the NAS, follow the steps below:
1. Go to "Storage Manager" > "iSCSI" > "LUN Backup". Click "Create a job".
2. Select "Restore an iSCSI LUN" and click "Next."
3. Specify the protocol, IP address/host name, and folder/path of the restore source.
Click "Test" to test the connection. Then click "Next".
4. Browse and select the LUN image file and click "Next."
5. Select the destination and click "Next".
6. The settings will be shown. Enter a name for the job or use the one generated by
the NAS. Click "Next".
7. Click "Finish" to exit.
The restore job will be executed immediately.
B utton
Na m e
De s c ription
Stop
Stop the running job.
Edit
Edit the job settings.
View
View the job status and logs.
Note :
For Step 5 above:
Overwrite existing LUN: Restore the iSCSI LUN and overwrite the existing LUN on
the NAS. All the data on the original LUN will be overwritten.
Create a new LUN: Restore the iSCSI LUN to the NAS as a new LUN. Enter the
name and select the location of the new LUN. Make sure you have created at
least one LUN on the NAS before editing the default LUN policy.
C re a ting iSC SI LUN Sna ps hots
Before creating an iSCSI LUN snapshot, make sure at least one iSCSI LUN and one iSCSI
target has been created on the NAS. To create iSCSI targets and LUN, go to "Storage
