QNAP TS-1079 Pro, Software User Manual

Page: 82 / 321

82
4.2.3.2 Adv anced ACL
With the advanced access control list (ACL), LUN masking policies can be configured for
each connected initiator. If the connected initiator is not on the list, the "Default"
policy will be applied to that initiator. To use this feature, click "Add a Policy". Enter the
policy name and the initiator IQN, assign the access right for each LUN created on the
NAS and click "Apply"
.
For descriptions on each field, refer to the table below:
Field Description
Read-only The connected initiator can only read the data from the LUN.
Read/Write The connected initiator has read and write access rights to the LUN.
Deny
Access
The LUN is invisible to the connected initiator.
If no LUN masking policy is specified for a connected iSCSI initiator, the default policy
will be applied. The system default policy allows read and write access from all the
connected iSCSI initiators. Click the default policy and "Edit" to edit the default policy.
To delete a policy, select a policy and click "Delete".
Note : Make sure at least one LUN has been created on the NAS before editing the
default LUN policy.
Hint: How do I find the initiator IQN?
Start the Microsoft iSCSI initiator and click "General". The IQN of the initiator can be
found.