QNAP TS-1079 Pro Software User Manual Download Page 67

Page: 67 / 321

To lock a volume, login the NAS as an administrator. Go to "Storage Manager" >

"Encryption". Select a volume. Click "Lock this Volume" and click "Yes". To unlock a

volume, login the NAS as an administrator, go to "Storage Manager" > "Encryption",

select the volume to be unlocked and click "Unlock this volume". Choose either to enter

the encryption password, or use the encryption key file exported previously. Click

"Apply". If the encryption password or the key file is correct, the volume will be unlocked

and become available.

4.2.2.5 Cache Acceleration

Based on the SSD technology, the Cache Acceleration feature is designed to boost

access performance of the Turbo NAS. For this feature, SSD drives need to be installed

to enable this function.

Please note that this feature is only available for certain NAS models, with memory

requirements. Refer to the following table for applicable models and SSD trays:

Applic a ble M ode l

SSD Tra y *

TS-x79U-SAS

All

TS-x79U

Disk 3, Disk 4

TS-x79 Pro

Disk 7, Disk 8

TS-x70U

Disk 3, Disk 4

TS-x70 / TS-x70 Pro

Last two trays

SS-x79U-SAS

All

* The SSD disks will only be detected if they are installed in the trays listed in the "SSD

Tray" column.

Refer to the table below for memory requirements:

C a c he C a pa c ity

RAM Re quire m e nt*

512 GB

from 1 GB to 4 GB

1 TB

from 4 GB to 8 GB

2 TB

from 8 GB to 16 GB

4 TB

Above 16 GB

*For example, for 1 TB of SSD capacity, at least 4GB RAMs are required for the NAS.

Summary of Contents for TS-1079 Pro


































































































































































































































































































































Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands

QNAP TS-1079 Pro, Software User Manual

Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands