Note
The JBOD enclosure may take up to 30 seconds to detect the new drive.
Installing Handles
Installing handles enables you to better grip and secure the TL-R400S JBOD enclosure.
1.
Power off the JBOD enclosure.
2.
Install a handle on an angle bracket.
a.
Align the openings on the handle with the two round screw holes on the angle bracket.
b.
Attach the screws to lock the handle to the angle bracket.
3.
Install the angle bracket on the JBOD enclosure.
a.
Align the holes on the angle bracket with the holes on the chassis.
Note
Ensure that the handle faces the same direction as the front panel.
b.
Attach the screws.
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Hardware Installation
18
