2. Product Overview
This chapter provides basic information about your QNAP JBOD enclosure.
About the TL-Rx00PES-RP JBOD series
The QNAP TL-Rx00PES-RP JBOD enclosures are designed to increase the capacity and utility of your NAS,
providing a wide range of storage applications. You can manage installed drives independently or configure
them as software RAID groups using the host NAS.
The TL-R1200PES-RP, TL-R1600PES-RP, and TL-R2400PES-RP feature twelve, sixteen, and twenty-four 3.5-inch
SATA drive bays, and two SFF-8644 1x2 ports.
Hardware specifications
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to
Component
TL-R1200PES-RP
TL-R1600PES-RP
TL-R2400PES-RP
Storage
Drive bays
12 x 3.5-inch SATA 6 Gbps 16 x 3.5-inch SATA 6 Gbps 24 x 3.5-inch SATA 6 Gbps
Note
You can purchase tray bases from QNAP or an authorized
reseller. For details, go to
Drive compatibility
3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Hot-swapping
This device supports hot-swapping for all drives.
External I/O Ports
SFF ports
2 x SFF-8644 1x2
Interface
Buttons
Power
LEDs
System
• Status
• Link
• Fan error
• Drive
• Enclosure ID
Ports
• Connector link
• Connector access
Dimensions
Form factor
2U Rackmount
3U Rackmount
4U Rackmount
QNAP JBOD Enclosure User Guide | TL-R1200PES-RP, TL-R1600PES-RP, TL-R2400PES-RP
Product Overview
5
