QNAP TL-R1200PES-RP, User Manual

Page: 36 / 48

5. Remove the failed drive from the JBOD enclosure.
6. Wait for 30 seconds or until the JBOD enclosure beeps twice.
7. Remove the failed drive from the drive tray.
8. Insert the new drive into the drive tray.
9. Install the new drive.
The JBOD enclosure beeps twice.
10. Wait for 30 seconds or until the JBOD enclosure beeps twice.
11. Go to Main Menu > Storage & Snapshots > Storage > Storage/Snapshots .
12. Locate the storage pool that contains the new drive and then verify that the status is
Rebuilding
.
Support and other resources
QNAP provides the following resources:
Resource URL
Documentation https://download.qnap.com
Compatibility List https://www.qnap.com/compatibility
NAS Migration Compatibility https://www.qnap.com/go/nas-migration
Expansion Unit Compatibility https://www.qnap.com/go/compatibility-expansion
Service Portal https://service.qnap.com
Product Support Status https://www.qnap.com/go/product/eol.php
Downloads https://download.qnap.com
Community Forum https://forum.qnap.com
QNAP Accessories Store https://shop.qnap.com
QNAP JBOD Enclosure User Guide | TL-R1200PES-RP, TL-R1600PES-RP, TL-R2400PES-RP
Troubleshooting 35