Installation requirements
Category
Item
Environment
• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids, or chemicals
Restricted access
• The device should be stored in a secure location with restricted access, controlled
through the use of a tool, lock and key, or any means of security.
• Only qualified, trained, and authorized device administrators with knowledge of
all restrictions, safety precautions, and installation and maintenance procedures
should have physical access to the device.
Hardware and
peripherals
• NAS
Note
• For details on compatible NAS models, maximum number
of JBOD enclosures supported by each NAS model,
and applicable PCIe slots, go to
.
• The NAS must run QTS 5.1.2 (or later) or QuTS hero h5.1.2 (or
later).
• Storage drives
Note
For the list of compatible drive models, go to
• Host bus adapter
Note
The QXP-3X4PES or QXP-3X8PES host bus adapter must be
installed on the NAS. Third-party host bus adapters may not be
compatible with QNAP JBOD enclosures.
• One or more SF-8644 connector cables
Note
• The QXP-3X4PES host bus adapter requires the CAB-
PCIE10M-8644-4X cable.
• The QXP-3X8PES host bus adapter requires the CAB-
PCIE10M-8644-8X cable (one is included with the JBOD
enclosure.)
Tools
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
QNAP JBOD Enclosure User Guide | TL-R1200PES-RP, TL-R1600PES-RP, TL-R2400PES-RP
Product Overview
12
