QNAP QTS 4.5 Series User Manual Download Page 67

Page: 67 / 575

Exporting Users

Go to

Control Panel

Privilege

Users

Click

Create

Import/Export Users

The

Import/Export Users

window appears.

Select

Export user and user group settings

Click

Next

QTS exports the user account list to your computer as a BIN file.

Tip

You can use this file to import users to another NAS running QTS.

Modifying User Account Information

Go to

Control Panel

Privilege

Users

Locate a user.

Perform any of the following tasks.

Task

User Action

Change password

Under

Action

, click

The

Change Password

window appears.

Specify a password that contains a maximum of 64 ASCII characters.

Verify the password.

Click

Apply

QTS 4.5.x User Guide

Privilege Settings

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

QNAP QTS 4.5 Series, User Manual, Page: 67 / 575

Search results

Summary of Contents for QTS 4.5 Series

Reviews: