QNAP QTS 4.5 Series, User Manual

Page: 63 / 575

Tip
QNAP recommends denying access to applications and network services that the user does not
require. Users without privileges to specific applications will not see it on their main menu.
7. Optional: Set a quota for the user.
Note
This option is only available when quotas are enabled.
a. Under Quota , click Edit .
b. Set the quota.
• No Limit : Quota settings do not apply to the user.
• Limit disk space to : Specify a quota for the user.
• Use group quotas : Group quota settings apply to the user.
Note
Individual quotas may override group quotas. For details, see Quota Conflicts .
8. Click Create .
Creating Multiple Users
1. Go to Control Panel > Privilege > Users .
2. Click Create > Create Multiple Users .
The Multiple Users Creation Wizard appears.
3. Click Next .
4. Specify the following information.
Field Description
User Name Prefix Specify a username that contains a maximum of 23 ASCII
characters and that does not:
• Contain a space
• Begin with the following characters: - # @
• Contain the following characters: @ " + = / \ : | * ? < > ; [ ] % ` '
This prefix will be included before all usernames.
Example:
test
User Name Start No Specify a start number with a maximum of 8 digits.
Example:
1
Note
QTS removes leading zeros in starting numbers.
For example,
001
becomes
1
.
Number of Users Specify the number of users (1–4095).
Example:
5
QTS 4.5.x User Guide
Privilege Settings 62