QNAP QTS 4.5 Series User Manual Download Page 267

Page: 267 / 575

Go to

Storage & Snapshots

Snapshot Backup

Snapshot Vault

Select a storage pool.

On a vault, click

The

Snapshot Vault

window opens.

Select a snapshot.

Click

Clone

The

Clone Snapshot

window opens.

Specify a LUN name.

Optional: Select an iSCSI target.
QTS will map the LUN copy to the target.

Click

QTS clones the LUN and then displays a confirmation message.

Cache Acceleration

Cache Acceleration enables you to create an SSD cache to improve the read and write performance of the
NAS.

Cache Acceleration Requirements

• The NAS model must support Cache Acceleration.

For information about NAS and drive bay compatibility, see

https://www.qnap.com/solution/ssd-cache

• The NAS must have one or more free SSDs installed in a compatible drive bay.

• The NAS must have a suitable amount of installed memory.

The amount of memory required depends on the size of the SSD cache.

QTS 4.5.x User Guide

Storage & Snapshots

266

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands