QNAP QTS 4.5 Series User Manual Download Page 252

Page: 252 / 575

Select the amount of reserved space.

Option

Description

Recommended

Reserve a percentage of the total storage pool
space.

Tip

The default value is 20%.

Custom

Reserve a fixed amount of storage pool space.

Click

Deleting Snapshots

Go to

Storage & Snapshots

Storage

Storage/Snapshots

Select a thick volume, thin volume, or block-based LUN.

Click

Snapshot

, and then select

Snapshot Manager

The

Snapshot Manager

window opens.

Optional: Change the view to list view.

Click

Select

List View

Select one or more snapshots.

Click

Snapshot Data Recovery

Restoring Files and Folders from a Snapshot

Tip

• Use snapshot revert to quickly restore all data on a volume or LUN.

For details, see

Reverting a Volume

• You can restore files and folders from a snapshots in File Station by enabling

Enable

File Station Snapshot Directory for administrators

For details, see

Snapshot Global Settings

Go to

Storage & Snapshots

Storage

Storage/Snapshots

Select a thick or thin volume.
The volume must contain at least one snapshot.

Click

Snapshot

, and then select

Snapshot Manager

The

Snapshot Manager

window opens.

Select a snapshot.

QTS 4.5.x User Guide

Storage & Snapshots

251

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands