10.
Click
to enable the VPN server.
The configured QuWAN QBelt VPN server settings are updated on QuRouter.
QVPN
QVPN allows you to create and manage VPN servers, add VPN clients, and monitor VPN logs.
QVPN Server Settings
QuRouter enables you to configure QNAP routers as a VPN server. You can configure multiple virtual servers
to host and deliver VPN services to users in an organization.
Note
A QNAP router can support up to 30 VPN tunnels, including QuWAN and QVPN
connections.
Enabling a QBelt VPN Server
QBelt is QNAP's proprietary communications protocol that incorporates Datagram Transfer Layer Security
(DTLS) protocol and AES-256 encryption.
1. Log in to QuRouter.
2. Go to QVPN Servers > QVPN Settings .
3.
Under QBelt, click
.
4.
Click
.
The QVPN Settings window appears.
5. Configure the QBelt server settings.
Setting
Description
Client IP pool
Specify a range of IP addresses available to connected VPN clients.
Important
By default, this server reserves the use of IP addresses
between 198.18.2.2 and 198.18.2.254.
If another connection is configured to use this range,
an IP conflict error will occur. Before adding this
server, ensure a VPN client isn't configured to use this
range as well.
Service Port (UDP)
Select the port used to access the server.
Note
Default port number: 4433
QHora-322 User Guide
Network Settings
50
