manualshive.com logo in svg

QNAP QHora-301W, User Manual

Share
Download
QNAP QHora-301W User Manual Download Page 34

Setting

User Action

Static IP

Manually assign a static IP address to the adapter. You must specify the following

information:

• Fixed IP Address

• Prefix length

Tip

Obtain the prefix length information from your network

administrator.

• Default Gateway

• Primary and secondary DNS servers

PPPoEv6

Select to specify a username and password for Point-to-Point Protocol over Ethernet

(PPPoE) IPv6 protocol.

Important

You must change the IPv4 WAN interface to PPPoE if you want to

use PPPoEv6 as the WAN interface.

Stateless (SLAAC)

The adapter automatically acquires an IPv6 address and DNS settings from the

router.

Important

This option requires an available IPv6 RA (router advertisement)-

enabled router on the network.

c. Configure the DNS settings.

7. Click Apply.

QuRouter updates the WAN settings.

Configuring Local Area Network (LAN) Access and Trunk Modes

Access mode is used in environments without any user-configured VLANs. This mode allows the router to

carry traffic without VLAN tagging and is used to connect end-user devices such as laptops, NAS, or printers.

Trunk mode is used in a VLAN-configured environment and is designed for connecting devices operating on

tagged VLANs (for example, VLAN-enabled switch, VLAN-enabled NIC, etc.). Ports using Trunk mode can be

linked between various network devices and are capable of carrying traffic across multiple VLANs. A VLAN

must be configured prior to configuring Trunk mode on the LAN port.

1. Open QuRouter.

2. Go to Network > WAN & LAN Settings .

3. Identify a LAN port.

4.

Under Action, click 

. 

The port configuration window appears.

5. Configure the mode settings. 

QHora-301W User Guide

Network Settings   

33

Summary of Contents for QHora-301W





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands