Operation
User Action
Result
Advanced system
reset
Press and hold the button for 15
seconds.
The default QTS settings are restored.
Tip
To retrieve old data after an
advanced system reset, recreate
the previous folder structure on the
switch.
LCD Panel
The LCD panel allows you to perform the following operations:
• Restart and power off the device
• Configure or change the LCD panel password
• View and configure network settings
• View information on the system, physical disks, and volumes
Viewing TCP/IP Settings
You can view the following settings for each network adapter on the device.
• IP address
• Subnet mask
• Default gateway
• Primary DNS
• Secondary DNS
1.
Press
Enter
or
Select
.
The panel displays the switch name and QTS version.
2.
Press and hold
Enter
for two seconds.
The panel displays
Main Menu 1. TCP/IP.
3.
Press and hold
Enter
.
The panel displays the IP address of the first network adapter.
4.
Press and hold
Select
to view the next TCP/IP screen.
Repeat this step as necessary.
Configuring TCP/IP Settings
You can configure the following settings for each network adapter on the switch:
• IP address
• Subnet mask
• Default gateway
• Primary DNS
QGD-3014-16PT User Guide
Basic Operations
41
