3.
Verify that the switch is recognized by the computer.
a.
Open Qfinder Pro on the host computer.
Note
To download Qfinder Pro, go to
https://www.qnap.com/utilities
.
b.
Locate the switch on the list.
Connecting the Switch to a Network
The QGD-3014-16PT can connect to the local area network through the host port or a PoE port.
1.
Power on the switch.
2.
Connect the switch to your local area network through one of the following port types:
Type
Method
Host Port
Select the switch IP address obtained from
Adapter 1
on the LCD
panel.
PoE Port
Select switch IP addresses obtained from
Adapter 2
or
Adapter 3
on the LCD panel.
3.
Run Qfinder Pro on a computer that is connected to the same local area network.
Note
To download Qfinder Pro, go to
https://www.qnap.com/utilities
.
4.
Enter the IP address in the Qfinder Pro search bar.
5.
Locate the switch in the list and then double-click the name or IP address.
The QTS login screen appears.
6.
Enter your QTS login information.
QGD-3014-16PT User Guide
Installation and Configuration
32
