3. Perform any of the following tasks.
Task
User Action
Search log files
a. Locate the Search field.
b. Enter search terms.
Delete log files
a. Click Clear.
The Clear Logs window opens.
b. Click Clear.
QSS or QuNetSwitch performs the specified task.
Resetting the Switch to Factory Settings
Resetting the switch deletes the data stored on the device and restores the switch to the default factory
settings.
Tip
You can also reset the switch to factory defaults by pressing and holding the physical reset
button for 10 seconds.
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to System Management > Settings > Factory Reset .
3. Click Factory Reset.
A confirmation message appears.
4. Click Yes.
QSS or QuNetSwitch resets the switch to the factory default settings.
Note
To log in to the interface again, you must locate the device using Qfinder Pro. For details,
see
.
Restarting the Switch
1. Log in to QSS, or open QuNetSwitch in QTS.
2.
Click
located on the upper-right corner of the page.
3. Click Restart Switch.
A confirmation message appears.
4. Click Yes.
QSS or QuNetSwitch restarts the switch.
Viewing the Switch Information
To view the hardware and system information of the switch, go to System Management > System
Information .
The screen provides the following information.
QGD Rackmount Switch User Guide
Switch Management
73
