Setting Up the NAS
Important
Read all safety requirements and information in
up the NAS or installing NAS components.
1.
Place your NAS device in an environment that meets the requirements.
For details, see
.
2.
Install the drives. For details, see the following topics:
•
Installing 3.5-inch Hard Drives on 3.5-inch Trays
•
Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
•
Installing 2.5-inch Solid-State Drives on 2.5-inch Trays
•
Installing M.2 Solid-State Drives on the System Board
For a list of compatible drives and expansion cards, go to
https://www.qnap.com/en/compatibility/
.
3.
Install expansion cards.
For details, see
.
4.
Install memory modules.
For details, see
5.
Connect the power cord and all applicable cables.
6.
Power on the NAS.
For details, see
.
7.
Install QuTS hero.
For details, see
8.
Log on to QuTS hero.
GM-1000 User Guide
Product Overview
21
