QMTECH XC7A 100T Starter Kit
User Manual V01
1.
Introduction
1.1
Document Scope
This demo user manual introduces the QMTECH XC7A100T core board and describes how to setup the
core board running with application sof tware Xilinx Vivado 2018.3. Users may employee the on board rich
logic resource FPGA XC7A100T-2FGG676I and large DDR3 memory MT41K128M16 to implement
various applications. The core board also has 108 non-multiplexed FPGA IOs f or extending customized
modules, such as UART module, CMOS/CCD camera module, LCD/HDMI/VGA display module etc.
1.2
Kit Overview
Below section lists the parameters of the QMTECH XC7A100T core board:
➢
On-Board FPGA: XC7A100T-2FGG676I;
➢
On-Board FPGA external crystal f requency: 50MHz;
➢
XC7A100T-2FGG676I has rich block RAM resource up to 4,860Kb;
➢
XC7A100T-2FGG676I has 101,440 logic cells;
➢
On-Board MT25QL128 SPI Flash, 16M bytes f or user conf iguration code;
➢
On-Board 256MB Micron DDR3, MT41K128M16JT-125:K;
➢
On-Board 3.3V power supply f or FPGA by using MP2315 wide input range DC/DC;
➢
XC7A100T core board has two 64p, 2.54mm pitch headers f or extending user IOs. All IOs are
precisely designed with length matching ;
➢
XC7A100T core board has 2 user switches;
➢
XC7A100T core board has 3 user LEDs;
➢
XC7A100T core board has JTAG interf ace, by using 6p, 2.54mm pitch header;
➢
XC7A100T core board PCB size is: 6.7cm x 8.4cm;
➢
Def ault power source f or board is: 2A@5V DC, the DC header type: DC-050, 5.5mmx2.1mm;
Figure 1-1. QMTECH XC7A100T Core Board Overview
