QMS QMS 4525, System User'S Manual

Page: 89 / 180

Selecting Page
Orientation
5-19 Printing Your Files
Using QMS DOC
The QMS DOC command syntax for page orientation is
%%IncludeFeature: orientation ( selection)
Your choices for selection are portrait and landscape. (See the QMS
Crown Document Option Commands manual for complete informa-
tion.)
Using VMS Commands
If you are connected to the printer through a DECnet network, you
can use the VMS PRINT command qualifier PAGE_ORIENTATION to
select orientation.
The PRINT command syntax for orientation is
$ PRINT/PARAM=(PAGE_ORIENTATION=SELECTION)- filename
Your choice for SELECTION is either PORTRAIT or LANDSCAPE.
(See the VMS Interface for QMS Printers manuals for complete infor-
mation.)
Three-hole-punched Paper Orientation
On the QMS 4525 Print System paper is inserted print-side down.
The hole placement must be as shown in the illustrations below for
proper image orientation for both three-hole punching and stapling
because staples are placed only in the top left corner on the physical
page.