QMS Magicolor, User Manual

Page: 89 / 446

3. In the window that appears, choose Continue.
4. In the window that appears, specify a folder to install the
utilities to and choose Save.
5. After all the files are extracted, choose Quit.
6. Open the Utilities folder in the PSExec 3.xx Folder and
double-click PSInstall to personalize the program.
7. Double-click the PSExec icon to run the program.
Check the README file for updates, and see the PS Exec
Help for information on using the program.
Installing LaserWriter 8.x and the magicolor 4.1 PPD
1. If you haven’t already, follow the instructions given above in
“Installing the Printer Utilities.”
2. Make backup copies of your current LaserWriter drivers and
the contents of your Printer Descriptions folder. (If you use
System 7, these files are stored in the Extensions folder in
your System Folder. If you use System 6, these files are stored
in the System Folder.)
3. Delete your LaserWriter 8 preferences files. (If you use
System 7, this file is stored in the Preferences folder in your
System Folder. If you use System 6, this file is stored in the
System Folder.)
4. Open the PSExec 3.xx Folder, then the Drivers folder, then
the LaserWriter folder to display the LaserWriter 8.x icon
(among other things).
5. Drag the LaserWriter 8.x icon to your current System Folder.
(The system knows where to copy it. If you’re prompted for
permission to copy the file to the folder, choose OK.)
Chapter 3
C o n n e c t i n g t h e P r i n t e r 3 - 5