QMS Magicolor, User Manual

Page: 176 / 446

Printing Transparencies
1. See “Refilling the Media Cassette” or “Manual Feed,” earlier
in this chapter, for information on loading media.
2. If you haven’t previously, set up the tray you want to use for
transparency printing:
a. At the printer control panel, press the Online/Offline key.
b. Press the Tray Select key until the LED for tray you want to use
for transparencies is lit on the control panel.
c. Press the Media key until the Transparency LED is lit on the
control panel.
d. Press the Online/Offline key.
3. Use your application’s print setup feature to select
Transparency printing, and select any other printing options
you want.
If you’re printing from a Windows or a Macintosh application,
you can now use the QMS-supplied driver to select
transparency printing. See chapter 3, “Connecting the
Printer,” for driver installation information. Then, in the
driver, select Overhead from the Color Setup options to print
from the tray you set up for transparencies (or you can select
the Transparency option from the Macintosh driver’s Media
listbox, or from the Windows driver’s Color Setup dialog
box). See the driver help for more information.
NOTE: Any time you select a media type from the driver, the tray
you’re printing to must already have been set from the
control panel for the desired media type.
4. Send your job.
Chapter 5
5 - 6 P r i n t M e d i a a n d D a i l y O p e r a t i o n s