QMS Magicolor CX, User Manual

Page: 48 / 222

Using the
Manual Feed
Tray
QMS magicolor CX User's Guide 2-20
Using the Manual Feed Tray
You can feed a single sheet at a time to the printer using the manual-
feed tray. This allows you to print on a different media type without
changing the media in the cassette, or to print on media not sup-
ported by the standard cassette (envelopes or thick stock).
1 Use your application's print setup feature to select the man-
ual-feed tray and the media type you plan to use (paper or
transparency).
If your application doesn't allow this, you can do it at the printer
control panel:
a Press the Tray Select key until the Manual Feed LED is lit.
b Press the Media key until the LED for the media type you
want (paper or transparency) is lit. (Choose the Paper setting
for label and envelope printing.)
If you're printing on thick stock (paper that's between 24 and
43 lb [90 g/m2 and 163 g/m2]), then use the Operator Con-
trol/Media menu to select this media type.
» Note: If you select media type from the driver, the tray you're
printing to must already have been set from the printer's
control panel for the desired media type.
2 Use your application's print setup feature to select any other
printing options you want.