QMS Magicolor 6100, Operation Manual, Page: 201 / 224

,& 2"*0
4
,
9
,& 2"*04
» Note: If you don’t have a duplexer unit installed, skip to the next section.
1 Remove the left plastic side cover from the
lower feeder unit.
» Note: If you have two lower feeder units
installed, remove the left plastic side cover
from the top lower feeder unit only.
2 Locate the cable at the left rear of the
optional feeder that connects the duplexer
to the printer, and then unplug it.