QMS Magicolor 6100, Operation Manual, Page: 195 / 224

,&!*
FG
,
'
,&!* FG
1 Turn off the printer.
2 Remove the power cable and all interface cables.
3 Remove the media cassette(s) from the printer.
,&
1 Open the printer’s front and top covers.
Leave them open during the entire repacking procedure.
2 Remove the four toner cartridges, attach the protective shields over their
magnetic rollers, and store them in their original packaging.
,& *
Caution: The OPC belt is extremely sensitive to bright light and direct sunlight. Limit
exposure to 2 minutes. While the printer is being moved, store the cartridge in its
original shipping box. If you don’t have this box, carefully wrap it in a piece of dark,
heavy cloth, and place it where it will not get scratched or damaged. If exposure
exceeds 2 minutes, put the cartridge in a dark place to recover before using it again.
Depending on exposure, recovery may take up to 2 hours.
Also, handle the OPC belt cartridge carefully. The belt’s extremely sensitive to body
oils, moisture, solvents, corrosives, dust, and scratches, all of which will reduce
print quality.