QMS Magicolor 6100, Operation Manual, Page: 187 / 224

/25
+"!*
/"55 6*("
/"*
,
. */
If there is insufficient gloss of the printed image,
Check the fuser oil condition.
If there is insufficient fusing and the image comes off when
the printed image is rubbed,
Check your media type—envelopes, glossy stock,
labels, transfer media, and thick stock have to be set in
the Thick Stock mode.
The paper being used may have absorbed moisture
(perhaps due to high humidity or having water spilled on the
paper supply). Toner does not adhere well to paper where it
has become wet.
Replace the paper in the cassette with dry paper.
Confirm the proper installation of the transfer roller. If
necessary, replace the transfer roller.