QMS Magicolor 6100, Operation Manual, Page: 173 / 224

.
"
+"!*
'
.
"
. "
You can check communication between the printer selected in the Chooser and the
Macintosh by sending a file to the printer from an application (see your application
documentation for more information) or by printing a directory, as described here:
1 Display a disk or folder window.
2 Set up page information.
a From the File menu choose Page Setup.
b Select paper size, orientation, and other necessary options.
c Choose OK.
3 Print a directory or a window.
a From the File menu choose Print Directory or Print Window. A dialog box
appears.
b Select the printing options you want, and then choose OK.
!**
This section contains a list of possible printer problems and solutions. Be sure you’ve
followed the steps in the
magicolor 6100 Installation Guide .
If there is no status message in the control panel message window, use the following
steps to identify the source of your problem and to learn of possible solutions:
1 Does the printer power light come on?
YES - Go to number 2.
NO - Check the following:
Is power supplied to the AC outlet.