QMS Magicolor 6100, Operation Manual, Page: 156 / 224

"&
.
$
FUSER OIL LOW
The oil bottle for the fuser unit
is running low. If you have a new
fuser oil bottle on
hand, you may want to
install it now. If you
don’t, order one now.
A limited number of
copies (about 100) will
still print. However,
when the oil runs out,
the printer stops and
the
FUSER OIL
EMPTY
message
appears.
IDLE
The printer is on line, but no
jobs are in process. No action needed.
INITIALIZING
The printer is warming up and
getting ready to go on line. Wait. No other action
needed.
INNER JAM
Media has jammed leaving
the OPC belt cartridge area. Locate and remove
the jam.
INPUT IDLE
PRINTING
The printer is on line and
printing jobs already in the
queue. No new jobs are
arriving at the communication
interfaces. No action needed.
INPUTBIN BIN JAM
Media has jammed while
being pulled from the
specified cassette. Clear the jam from the
specified cassette.
MEDIA MISMATCH
The media detected in the
cassette doesn’t match the
media size setting. Change the media in
the cassette or change
the media size setting
.
This status message... means... Do this...