QMS Magicolor 6100, Operation Manual, Page: 153 / 224

"&
.
+"!*
BELT CARTRIDGE
MIS-INSTALLED
The OPC belt cartridge is
either missing or incorrectly
installed. Ensure that an OPC
belt cartridge is
correctly installed.
CANCEL ALL JOBS
The Cancel key has been
pressed, and one or more of
the print jobs in the print
queue are being canceled. Press Select for all
jobs with a printing,
interpreting, spooled,
or terminating status
to be completely
removed from the
system.
CANCEL JOB
The Cancel key has been
pressed, and one or more of
the print jobs in the print
queue are being canceled. Press Select and the
oldest job in the print
queue will be
canceled.
CHECK CLEANING
ROLLER
The cleaning roller needs to
be replaced. Install a new cleaning
roller.
CHECK WASTE TONER
Either the waste toner pack is
full and needs to be replaced,
or it is incorrectly installed. Ensure that the waste
toner pack is not full
and is correctly
installed.
CLEANING ROLLER
MISINSTALLED
The fuser cleaning roller isn’t
installed correctly. Remove and reinstall
cleaning roller.
CREATED FILE
The accounting file has been
created. No action needed.
This status message... means... Do this...