QMS Crownnet Setup Manual Download

Page: 30 / 86

Software

Installation

QMS CrownNet Setup Guide

This utility operates over the NetBIOS/NetBEUI protocol from the fol-
lowing Windows environments:

Windows 3.1—with LAN Server/LAN Manager Workstation Ser-
vice

Windows for Workgroups 3.11, Windows NT 3.5 and above, or
Windows 95—with Microsoft Windows Network (Microsoft Net-
BEUI protocol)

Note:

The Print Manager must be activated in all Windows

environments. In addition, the Microsoft NetBEUI protocol must be
installed and operational prior to the installation of the QMS
CrownNet Print Utility for Windows. Refer to your Windows
documentation for installation and configuration instructions.

The installation program creates a CrownNet Print Utility group with a
CrownNet Print Utility icon.

With Windows running, insert the QMS Software Utilities CD-
ROM in your computer's CD-ROM drive.

Open the Run dialog box.

Windows 3.1, Windows for Workgroups, Windows NT
3.x—In Program Manager, from the File menu choose Run...

Windows 95,Windows NT 4.x—From the Start menu
choose Run...

In the Run dialog box enter the path and filename for the
install program.

For example:

:\platform\windows\prnutil\prntutil

(where

is the letter of the drive in which you inserted the

CD-ROM), and choose OK.

Note:

See the main readme file on the CD-ROM for the exact

location of this file.

Summary of Contents for Crownnet























































































Search results

Summary of Contents for Crownnet

Reviews:

Related manuals for Crownnet

Brands by name

Popular brands

QMS Crownnet, Setup Manual

Search results

Summary of Contents for Crownnet

Reviews:

Related manuals for Crownnet

Brands by name

Popular brands