QMS 860, User Manual, Page: 51 / 398

Enabling/Disabling the Start-up Page
Save time and supplies by disabling the start-up page. The system
automatically enables the start-up page to print when the printer is
turned on.
The start-up page contains information that Customer Technical
Support needs to solve your printer problems. If you only need a
start-up page occasionally, use the PS Executive Series Utilities or
the printer control panel to print a status page instead of a start-up
page. See the “Printing a Status Page” section of this chapter, for
more information on printing a status page. You can disable the
start-up page in two different ways:
1. Use the PS Executive Series Utilities. See the PS Executive
Series Utilities manual for more information.
2. Use the printer control panel.
How to Enable/Disable the Start-up Page
Press the control panel keys in the order listed in the following
instructions. The printer responds by displaying a status message
in the message window. You may need to press the Next key one
or more times to advance through the list of selections or options.
Control
Panel Keys
Message Window Printer Response
ONLINE/
OFFLINE
IDLE
Turns off the indicator.
MENU
CONFIGURATION
OPERATOR CON-
TROL
Accesses the Configura-
tion menu.
NEXT
CONFIGURATION
ADMINISTRATION
Advances to the Configu-
ration / Administration
menu.
Chapter 2
P r i n t e r I n s t a l l a t i o n 2 - 2 1