QMS 860, User Manual, Page: 50 / 398

Printing a Start-up Page
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 860 Print System.
Information printed on the start-up page follows:
■
Printer product name
■ Cumulative number of printed sheets
■ Amount of resident RAM (in bytes)
■ Number of typefaces in ROM
■ Standard interfaces, optional network interfaces,
emulation modes, and printer communication protocol
information
■
Software version number
■ Firmware version number
If the start-up page prints with all the start-up page information,
and the print quality is good, go to chapter 3, “Printer-Host
Interface.”
Otherwise, see chapter 9, “Troubleshooting,” for more information
on printing a start-up page.
WARNING!
Turn the printer off and unplug the power cord
before checking for correct printer installation.
ACHTUNG!
Schalten Sie bitte den Drucker aus und ziehen
Sie auch den Netzstecker heraus, bevor Sie die korrekte Instal-
lation des Druckers überprüfen.
Chapter 2
2 - 2 0 P r i n t e r I n s t a l l a t i o n