QMS 860, User Manual, Page: 165 / 398

Replacing the Toner Cartridge
The toner cartridge lasts for approximately 6,000 prints at 4%
coverage. When the toner supply is low, the printer’s message
window displays
TONER OUT
, and usually parts of the page print
lighter than normal.
Sometimes you may increase the life of the cartridge by taking it
out of the printer and redistributing the toner in the cartridge as
described in the “Installing the Toner Cartridge” section of this
chapter. If the
TONER OUT
message remains in the message
window, the toner cartridge must be replaced.
NOTE: Keep the toner cartridge away from your CRTs, disk
drives, and floppy disks. The magnets in the cartridge can
damage stored data. Also, we recommend that you do not
use refilled toner cartridges. Due to variations in toner
quality and reliability, your print quality may be reduced.
In addition, toner leaks affect your warranty.
The toner cartridge contains the toner and photosensitive drum
needed to operate the laser printer. You may purchase additional
cartridges from your QMS vendor. See appendix B, the “Print
Engine” section, for toner specifications.
WARNING:
The fixing assembly and print delivery guide
areas become extremely hot when the printer is used. Personal
injury could result if you touch those areas when opening the
front cover or removing the toner cartridge.
ACHTUNG:
Die Fixiereinheit und die Papierführung werden
sehr heiß, wenn der Drucker in Betrieb ist. Es besteht daher
Verletzungsgefahr, wenn Sie die Abdeckklappe öffnen oder die
Tonerkartusche auswechseln wollen!
Chapter 5
5 - 3 0 D a i l y O p e r a t i o n s