QMS 860, User Manual, Page: 163 / 398

Clearing Front Upper Door Area Jams
WARNING:
The inside of the front upper door becomes ex-
tremely hot when the printer is used. Personal injury could
result if you touch that area.
ACHTUNG:
Die Innenseite der oberen Abdeckklappe wird
im Betrieb sehr heiß; bei Berührung dieser Partie besteht
Verletzungsgefahr!
1. Open the front upper door and remove the jam by pulling in
the direction of the arrow (fig. 5.19).
After removing the jammed print media, close the front upper
door. If the jam has been cleared, printing will restart. If you
cannot easily remove the print media from the front upper
door area, remove the jam from the front inside area as
described in the “Clearing Front Inside Area Jams” section of
this chapter.
Front Upper Door
Fig. 5.19 Clear Front Upper Door Area Jam
Chapter 5
5 - 2 8 D a i l y O p e r a t i o n s