QMS 860, User Manual, Page: 121 / 398

Administration /Memory
Use the Administration /Memory Menu (fig. 4.11) to allocate
system memory (RAM) among the various memory “clients.” The
printer is shipped with 12 MB of memory but can be upgraded to
32 MB. The size of most memory clients can be configured by
experienced users (systems engineers and technical support staff)
to best meet specific printing, computing, and network needs.
However, misallocated memory may hinder the performance level
of the printer.
On your QMS 860 Print System you can maintain memory in one
of two ways: allocate each client’s memory individually through
the Administration / Memory menu or use Quick Config to easily
configure your frame buffer. See appendix F, “Memory
Management,” for more detailed information on memory.
Configuration
Menu
Administration/Memory
Quick Config
K Mem for Spool
K Mem for PSHeap
K Mem PS Fonts
K Mem Emulation
K Mem Emul Temp
K Mem Display
K Mem Framebuff
K Mem Disk Cache
MB Printer Mem
Fig. 4.11 Administration/Memory
Chapter 4
P r i n t e r C o n f i g u r a t i o n 4 - 4 1