QMS 860, User Manual, Page: 336 / 398

Quick config provides a simple method of defining how much
memory should go to each of the clients for the most complicated
conditions in your environment. This option asks you to specify the
largest paper size used, and the highest resolution used. It then
transfers memory to the clients that require it to perform these
functions. Any extra memory is allocated to the printer’s excess
memory client.
NOTE: The printer does not allow you to choose features that do
not work with the amount of memory currently installed
on your printer.
Use quick config any time your printing needs change or when
additional memory is installed. Keep in mind that using quick
config does not change the paper size or resolution you are using.
These settings just ensure you have enough memory allocated to
the appropriate clients to perform these functions when requested.
Memory Clients
Memory clients are blocks of printer memory that are dedicated to
a specific purpose. Each of the memory clients is located in the
Configuration / Administration / Memory menu. When you
allocate memory to a specific client through the control panel, it is
allocated in kilobytes (KB). Each time you make changes in the
Administration / Memory menu, print out a status page to confirm
the memory reallocation. The sizes listed on the status page are in
bytes, so you must divide the numbers on the status page by 1024
to get the equivalent number of kilobytes entered through the
control panel.
NOTE: The value for each memory client must be divisible by 4
KB. Therefore, if a value is entered that is not evenly
Appendix F
F - 8 A d d i t i o n a l T e c h n i c a l I n f o r m a t i o n