
Ledger Versus 11 x 17" Problem
If your ledger image (17 x 11") prints as an 11 x 17" image, check
that the paper size is set to 11 x 17". Ledger is imaged in landscape
orientation and 11 x 17" is imaged in portrait orientation. The
preferred method is to let your application set the orientation, but
if this is not possible, set the orientation to landscape using the
printer control panel. See chapter 4, the “Operator Control Menu”
section, for more information on orientation.
End-of-Document (EOD) Command Problems
The information in this section is intended to assist you in
recognizing and fixing EOD problems.
■
If you add an EOD command to your file and the EOD
command prints on your job, you may need to set the end
job mode on the printer’s control panel. See appendix F,
the “Setting the End Job Mode for the Serial and Parallel
Protocols” section, for more information.
■
If your QMS Crown printer is not interpreting the selected
EOD command correctly for you print job, then do the
following:
1. Check the syntax and spelling of the EOD command in your file
or network job separator, depending on your environment.
2. Check that the end job mode on the printer’s control panel and
the EOD command in your file or network job separator,
depending on your environment match.
3. Check with your system administrator or applications
development department to ensure that you are using the
standard EOD command for your organization.
■
If the End Job Mode option is set to
None
, and if an EOD
command is inserted between each print job, the EOD
Chapter 9
T r o u b l e s h o o t i n g
9 - 1 5
Summary of Contents for 860
