QMS 860, User Manual, Page: 268 / 398

INSTALL OPTION
INSTALL COM-
PLETE Displays after the option is
installed.
MENU
DISK OPERATIONS
INSTALL OPTION
Exits from Install Option
and returns to the Disk Op-
erations menu.
After the option is installed, remove the card from the slot and place
the printer back on line.
Removing an Optional Font or Emulation
Use the Disk Operations/Remove Option to remove optional fonts
or emulations from your hard disk. You need the original font or
emulation card containing the files. The Remove Option compares
the contents of the card against the contents of the hard disk and
then deletes the matching files from the hard disk.
How to Remove an Option
After you have accessed the Administration/Disk Operations
menu, press the control panel keys in the order shown in the
following instructions to remove an option. The printer responds
by displaying a status message in the message window. You may
need to press the Next key one or more times to advance through
the list of selections or options. The following symbols are used in
this procedure: the disk or card number is designated with the “#”
symbol and the card number is CAR0 or CAR1.
Control
Panel Keys
Message Window Printer Response
SELECT
DISK OPERATIONS
REMOVE OPTION
Acce sses Di sk Op era-
tions/Remove Option.
NEXT or
SELECT
REMOVE OPTION
DSK#:
Advances through the list
of hard disks or accesses
Chapter 8
8 - 5 3 P r i n t e r O p t i o n s